Document Type
Article
Abstract
The rapid commercialization and large-scale application of proton exchange membrane fuel cells (PEMFCs) have raised stringent requirements for the durability and service lifetime of core structural components, among which metallic bipolar plates are regarded as one of the most critical parts restricting the long-term stable operation of fuel cell stacks. Traditional in situ and ex situ evaluation methods for bipolar plate coating durability suffer from obvious drawbacks, including extremely long aging cycles, high experimental cost, poor repeatability, and the inability to accurately reproduce the complex dynamic operating environments of actual vehicle-used PEMFCs, which greatly limits the efficiency of coating performance screening and lifetime prediction. To overcome these bottlenecks, this work selects commercially available carbon-coated 316L stainless steel as the metallic bipolar plate substrate and constructs a three-electrode ex situ accelerated evaluation platform under controlled acidic, fluoride-containing, oxygenated conditions at elevated temperature. Firstly, the basic corrosion resistance, electrical conductivity, interfacial contact resistance (ICR), micromorphology and elemental composition of the carbon coating were systematically characterized to verify its basic applicability and meet the preconditions for accelerated aging tests. Subsequently, four critical influencing factors including gas flow rate, temperature, solution pH and applied potential were comprehensively screened and optimized, and applied potential was identified as the most sensitive and controllable factor for accelerating corrosion dominating the aging degradation behavior of coated bipolar plates. On this basis, a dynamic electrochemical stress protocol was developed with reference to the temporal characteristics of the CLTC-P cycle specified in GB/T 38146.1-2019 and the durability-cycle concepts described in GB/Z 44116-2024, and applied to the ex situ accelerated testing of formed bipolar plates with flow channels. The experimental results demonstrate that the electrochemical corrosion and failure evolution of coated bipolar plates under the proposed dynamic electrochemical stress protocol can be distinctly divided into three sequential stages: pitting corrosion initiation, localized coating delamination, and complete coating failure. A preliminary comparison with a bipolar plate retrieved after 1000 h of actual stack operation showed a corrosion current density comparable to that of the ex situ sample after approximately 7 h of cumulative dynamic-stress exposure, corresponding to an apparent preliminary apparent preliminary apparent acceleration factor of approximately 143. The proposed protocol provides an efficient approach for rapid durability screening and investigation of coating-failure evolution under controlled ex situ conditions.
Graphical Abstract
Keywords
Proton exchange membrane fuel cell, Metallic bipolar plate, Corrosion failure, Dynamic electrochemical stress, Ex situ accelerated evaluation
DOI
10.61558/2993-074X.3631
Online Date
11-12-2026
Recommended Citation
Haoqing Zheng, Xia Sheng, Xiaodan Wen, Zhibo Liu, Yuxin Xie, Chunyu Ru, Dan Wang, Fangbing Liu, Ying Liu, Guangyu Chen, Shuaifeng Lou. Ex Situ Rapid Evaluation of PEMFC Metallic Bipolar Plate Coatings under Dynamic Electrochemical Stress Conditions[J]. Journal of Electrochemistry, doi: 10.61558/2993-074X.3631.