Abstract
Coarse α-LiALO2 powder was transferred completely to γ-LiAlO2 at 900 ℃ for ten hours. Fine γ-LiALO2 powder was prepared by “chloride” synthesis. MCFC matrix was fabricated by mixing the coarse and fine γ-LiALO2 powder and by tape cast. The out'put voltage of the cell assembled with the matrix was 0.85 and 0.75 V respectively at 200 and 300 mA/cm 2, and power density was about 250 mW/cm2. The performance of the matrix fabricated with the mixed powder was obviously more advanced than that of the matrix fabricated with only coarse γ-LiALO2 powder.
Keywords
“Chloride" synthesis, Y-LiAlO2, Matrix, MCFC performance
Publication Date
2000-02-28
Online Available Date
2000-02-28
Revised Date
1999-08-30
Received Date
1999-05-13
Recommended Citation
Hua-xin LIN, Bao-lian YI, Lian-ying KONG, En-jun ZHANG, Li ZHOU, Feng-xia WANG.
Study on Preparation of Coarse and Fine γ-LiAlO2 Mixed Powder Used for MCFC Matrix[J]. Journal of Electrochemistry,
2000
,
6(1): 57-64.
DOI: 10.61558/2993-074X.3209
Available at:
https://jelectrochem.xmu.edu.cn/journal/vol6/iss1/11
Included in
Engineering Science and Materials Commons, Materials Chemistry Commons, Materials Science and Engineering Commons, Physical Chemistry Commons